How To Set Up Tcl Soundbar
ALTO 6
2.0 Channel Sound Bar with Dolby Sound
Quick Start Guide
What's in the box
Make sure you read all the prophylactic information
before y'all use this product.
2a Overview
Sound Bar main unit
Air conditioning input power connector
AUX input connector
Optical input connector
HDMI ARC connector
USB Type-A connector
Place your Sound Bar
The ideal identify to position the Audio Bar is
centered underneath your TV.
Wall mount your Sound BarRequired tools:
- Identify the supplied wall-mount template on the wall. Make certain the wall mount template is at least ii inches beneath the center of the Television set.
- Apply a level to brand certain the wall mount template is positioned accurately.
- Use the tape to stick the wall mountain template firmly on the wall.
- Mark on the wall using each marking on the template through the mounting holes.
- Take abroad the wall mount template.
- Drill a spiral pigsty at each marking on the wall.
Wall mountain your Sound Bar
Required tools:
- Insert the wall anchors in the holes on the wall.
- Insert the supplied screws into the hole of the wall anchors.
- Fix and tighten the wall subclass screws on the wall, but exit a niggling infinite for hanging the brackets.
Wall mountain your Audio Bar
Required tools:
• Unscrew the safe cushions from the lesser of the soundbar and prepare them aside for potential utilise in the hereafter 10
• Attach the included wall bracket mounts to the audio bar in the same holes the prophylactic cushions were removed from. 11
• With the brackets now attached to the soundbar, choice up the soundbar and attach information technology to the wall screws, like to how y'all would hang a picture. Make sure everything is tight. 12
Connect to your TV
At that place are 3 means to connect your sound bar to the TV (listed in the gild that nosotros recommend): HDMI ARC (refer to 4a), Optical (refer to 4b), and AUX (refer to 4c)
For the U.s. only: If you have a Roku TV TM, just plug in the HDMI cable and follow the Roku TV Ready TM on-screen instructions.
ROKU Television receiver READY
Simple setup
One remote
Quick settings
HDMI-ARC
Connect the Sound Bar with your TV through the supplied HDMI cable.
Connect the Sound Bar to the power supply with the supplied power cord.
Optical
Connect the Sound Bar with your TV through the supplied Optical cable.
Connect the Audio Bar to the power supply with the supplied power cord.
AUX
Connect the Sound Bar with your Television through AUX cablevision (not supplied).
Connect the Sound Bar to the ability supply with the supplied ability cord.
Install or replace the remote batteries
Battery Type: 1.5V AAA Element of group i battery x 2
Using the Remote
Pair with your
Bluetooth device
You can stream music from your mobile device via Bluetooth.
i. Press.
2. Printing.
3. Press and hold
or
on the remote control or press and hold on your soundbar.
> You lot hear a audio signal and blue light is flashing on the soundbar.
> The Sound Bar is ready to pair.
4. Power on your Bluetooth device and actuate its Bluetooth function.
5. Select TCL Alto six.
> You hear a audio signal.
> Pairing is successful.
6. If y'all want to re-pair with another device, please repeat step iii.
Sound Bar LED Display
The LED display on the Audio Bar gives your information about the condition of the Sound Bar.
| Sound Bar status | LED Indications |
| In standby mode | Red |
| In HDMI ARC mode | Purple |
| In OPT mode | Yellowish |
| In AUX mode | Light-green |
| In USB mode | Cyan |
| In Bluetooth mode | Blue |
FAQ
Does this Sound Bar work with any Television?
Yep, the Sound Bar is compatible with any Television that has 1 of the ports beneath:
1. HDMI supporting ARC (preferred)
two. Optical sound output (TOSLink)
iii. Headphone output
When the Audio Bar and TV are both on, there is an echo upshot.
If yous use an HDMI-ARC connectedness, please bank check if the HDMI-CEC characteristic of your TV is turned on. This feature may exist
called T-Link, Anynet+, SimpLink, BRAVIA Link, EasyLink, or VIERA Link.
If using an optical or AUX connexion, simply mute the Telly speaker.
How many sound modes are available?
Iii sound modes – Film, Music, and Telly.
How to make clean the sound bar?
Delight continue your soundbar in a dry and ventilated environment.
If it needs to exist cleaned, please wipe information technology gently with a soft, dry out fabric without h2o or other cleaning agents.
All technology names mentioned are the trademarks or registered trademarks of their respective companies.
Do Non Render TO THE Shop
WEARE READY TO Assist contact united states first with any questions
back up.tclusa.com
support.tclcanada.com
or TCL Back up: ane-877-300-9223
TAKE CARE WHEN REMOVING THE SOUNDBAR
ROKU TV Ready
Roku TV, Roku TV Set up, and the Roku TV Ready logo are trademarks of Roku, Inc.
The Adopted Trademarks HDMI, HDMIHigh-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Ambassador, Inc. in the United States and other countries.
The Bluetooth° word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TTE Corporation is nether license. Other trademarks and merchandise names are those of their respective owners.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Copyright © 2022 TCL.
All rights reserved.
TS6100_NA_QSG_V1.8
Documents / Resource
Source: https://manuals.plus/tcl/alto-6-2-0-channel-sound-bar-with-dolby-audio-manual

0 Response to "How To Set Up Tcl Soundbar"
Post a Comment